Carbide-disc-cutters-carbide-disc-cutters
  • 产品介绍
  • 技术参数
  • 配置优势
Properties and applicationsOther types may be offered by customers' requirement
GradeDensityT.R.SHardnessPerformance & application recommended
g/cm3MPaHRA
 SH6A14.9185092.0Fine   grain alloy, good wear resistance. Semifinishing of chilled cast iron,   non-ferrors metals alloys, semi-finishing and finishing of hardened   steel, alloy steel.
 SH10A14.8245090.5High wear resistance, high bending strength,,used for dis saw blads in electrical line.
 SH2514.8220089.5High   strength in use, impact and shock resistance higher than YG6, but wear   resistance and cutting speed comparatively lower. Roughing of cast   irons, non-ferrors metals and their alloys as well as
 SH30

14.7

232089.5High   strength in use, impact and shock resistance higher than YG6, but wear   resistance and cutting speed comparatively lower. Roughing of cast   irons, non-ferrors metals and their alloys as well as
 SH3514.5220091.0Fine grain alloy, good wear resistance. Used for processing hard wood,veneer board,PCB,PVC and metals.
 SH4014.5248092.0Fine   grade alloy, with high wear resistance, high bending strength, high   resistance to bonding, high thermal strength. Machining of refractory   alloys, stainless steel and high
 SH5014.3242090.0Conventional wear resistance, high bending strength,used for steel alloy etc.
Types of discsunit:mm
TYPEDdS
 Φ12×Φ6×S1260.6-4.5
 Φ13×Φ6×S1360.6-4.5
 Φ16×Φ6×S1660.6-4.5
 Φ22×Φ10×S22100.6-4.5
 Φ25×Φ12×S25120.6-5.5
 Φ32×Φ10×S32100.8-5.5
 Φ40×Φ10×S40100.8-6.0
 Φ45×Φ13×S45130.8-6.0
 Φ53×Φ13×S53130.8-6.0
 Φ52×Φ24.5×S5224.50.8-6.0
 Φ53×Φ24.5×S5324.50.8-6.0
 Φ55×Φ16×S55160.8-6.0
 Φ58×Φ22×S58220.8-6.0
 Φ60×Φ19×S60190.8-7.0
 Φ63×Φ17×S63170.8-7.0
 Φ70×Φ22×S70220.8-7.0
 Φ75×Φ22×S75220.8-7.0
 Φ80×Φ22×S80220.8-7.0
 Φ83×Φ21×S83210.8-7.0
 Φ86.5×Φ21.5×S86.521.51.0-7.0
 Φ90×Φ22×S90221.0-7.0
 Φ100×Φ22×S100221.0-7.0
 Φ125×Φ22×S125221.0-7.0
 Φ200×Φ70×S200703.0-4.5
 Φ250×Φ70×S250703.0-4.5
 Φ250×Φ95×S250953.0-4.5
Previous Next